One of the most important ingredients in high-performance, long-lasting, durable concrete produced today is concrete admixtures. AdmixGreen uses nano technology to provide powerful results that have both economic and environmental benefits.
AdmixGreen is ideally suited for concrete applications such as large structures, parking garages, highways, bridges and airports.
AdmixGreen Project Applications
- Parking Structures
- Drive Ways
AdmixGreen Replaces the Need for Multiple Additives
- Shrinkage Reducing
ADMIXGREEN is a RTU – (Ready To Use) Nano Ceramic Polymer curing admixture for Portland Cement, the composition is an aqueous solution that is amber to slightly yellow in color.
STRONG: ADMIXGREEN provides strength to concrete plus protection from cracking which is needed in bridges, roads, buildings, and foundations in any climate. It also reduces cracking on driveways and sidewalks.
SIZES: Shipped in 55gal drum or 330gal totes
DOSAGE: 50 – 60 ounces of ADMIXGREEN per cubic yard of Portland (Based on percentage of water in your mix) (not to exceed 64 ounces).
ASR INHIBITOR – Alkali-silica Reactivity Inhibitor reduces the amount of shrinkage to control drying and minimize cracking, creating a more durable structure.
SUPERPLASTICIZER – Increases density and bond strength, allows easier flow of concrete (rheology modification), and is workable so concrete can be placed with little or no vibration or compaction. The effects of superplasticizers typically lasts 30 to 60 minutes.
CORROSION INHIBITOR – ADMIXGREEN can be used as a defensive strategy for concrete structures, such as marine facilities, highway bridges, hotels and parking garages, that will be exposed to high concentrations of chloride.
WATER REDUCER – Reduces the required water content for a concrete mixture by about 5 to 10 percent. Consequently, concrete containing a water-reducing admixture needs less water to reach a required slump than untreated concrete. This admixture reduces water content by at least 8 percent and tends to be more stable over a wider range of temperatures.
INCREASE TENSILE STRENGTH – ADMIXGREEN will increase PSI by +20% in cured concrete.
- Increased Compressive and Flexural Strength
- Improved ASR Inhibitor
- Rheology Modification – easy flow of product
- Cross Linking – Interdigitation
- No Gas Penetration
- No Water Intrusion
- No Freeze Thaw Effect
- Prevents Cold Jointing
- Prevents Micro Fissures
- Reduces Porosity
- Adds Shear
- Low Slump
- Provides even Curing Process
- Prevents pockets
PHYSICAL/CHEMICAL PROPERTIES: ADMIXGREEN is composed of a Non-Chemical Proprietary Formula that sequesters harmful materials inherent in finished concrete. No entry or exit occurs when ADMIXGREEN is used with concrete to make a finished product, preventing rust on internal infrastructure rebar/metals, along with not allowing any exit of additional additives.
INSTALLATION: ADMIXGREEN can be added at the job site or at the batch mixing facility when filling the truck.
SITE PREPARATION: Follow the job specifications for each project. ADMIXGREEN will add to strength and durability to improve the finished project.
MIXING: For best results it is recommended to add ADMIXGREEN into the water that will be used for your mix. This ensures a thorough and even mixture while blending the concrete.
MACHINE MIXING: To insure even and thorough blend, allow 5 minutes of machine mixing.
HAND MIXING: ADMIXGREEN should be added to the water first, then using the shovel or hoe thoroughly mix until a finished workable product is visible.
TEMPERATURE OF WATER: Normal water temperatures are acceptable. Follow job specifications for any special circumstances.
APPLICATION: ADMIXGREEN is an admixture designed to improve the workability, strength, and durability of finished concrete, with added benefits that are not standard in today’s industry.
CURING: ADMIXGREEN quickens the curing process to provide a even cure throughout the concrete by its method of repelling the water/moisture and allowing the molecular structure to evenly align at the molecular level.
ALTERNATE CURING METHODS: NOT NEEDED.
Dispose of container and unused contents in accordance with Local, State, and Federal regulations. EMPLOYERS should obtain a copy of the Safety Data Sheet (SDS) from your supplier. Do not store at temperatures greater than 140° Fahrenheit / 60° Celsius or in direct sunlight. DO NOT TAKE INTERNALLY! Use eye protection to avoid contact with eyes. In case of eye contact, open eyelids wide and flush immediately with plenty of water for at least 15 minutes. Use protective measures to keep off of skin. Wash off well if product comes in contact with skin. If swallowed, CALL PHYSICIAN IMMEDIATELY! GET MEDICAL ATTENTION. KEEP OUT OF REACH OF CHILDREN!
- Please make sure you have read and understand the product label and SDS before using this product. Avoid breathing vapors, spray or mists. Use only with adequate ventilation. Wash thoroughly after handling. Observe label precautions.
- Non-flammable • Warning: May irritate eyes and skin • Storage: Do Not Freeze • Shelf Life: 1-2 years in storage.
NOTICE OF LIMITED WARRANTY:
We, the manufacturer, warrant only that this product is free of defects since many factors which affect the results obtained from this product such as weather; workmanship, equipment utilized, and prior condition of the substrate are beyond our control. We will replace at no charge any product proved to be defective within 12 months of purchase if proof of purchase from an authorized distributor is provided. DISCLAIMER OF The Limited Warranty is IN LIEU OF any other warranties express or implied including but not limited to any implied warranty of MERCHANTABILITY or fitness for a particular purpose; and we, the manufacturer, shall have no further liability of any kind including liability for consequential or incidental damages resulting from any defects or any delays caused by replacement or otherwise.
333 Fern Street, Suite 2014
West Palm Beach, Florida 33401
Sales Support: email@example.com